Cisco CCNA Training Part 1 ICND 1 640-822 Online Course
The 640-822 Interconnecting Cisco Networking Devices Part 1 (ICND1) is the exam associated with the Cisco Certified Entry Network Technician certification and a is a first step in achieving the CCNA (Cisco Certified Network Associate) certification. This CCNA training course will give you the knowledge and skills required to successfully install, operate, and troubleshoot a medium office network. To complete your CCNA training and gain the full qualification, the Cisco CCNA Training Part 2 ICND2 640-816 is also required. Alternatively you can complete 1 intensive Cisco CCNA training course; CCNA 640-802 with 1 exam instead of 2 smaller ones. There are no specific prerequisites for this course, although it is recommended that you should have at least some experience in networks or completed CompTIA courses A+ and N+.
|
|
Cisco CCNA Training 640-802: |
£499.99 |
|
|
|
Cisco CCNA Training Part1 ICND1 640-822: |
£299.99 |
|
|
|
Cisco CCNA Training Part2 ICND2 640-816: |
£299.99 |
|
|
|
Cisco CCDA Training: 640-863: |
£399.99 |
|
|
|
Cisco CCNP Training: BCMSN 642-812: |
£399.99 |
|
|
|
Cisco CCNP Training: BCSI 642-901 |
£399.99 |
|
|
|
Cisco CCNP Training: BCRAN 642-821 |
£399.99 |
|
|
|
Cisco CCNP Training: ISCW 642-825 |
£399.99 |
|
|
|
Cisco CCNP Training: ONT 642-845 |
£399.99 |
|
Cisco CCNA Part 1 (ICND1) 640-822 Training Online Course Lessons:
Total Time: 10 hour(s)
- 1 Networking Basics
- Identify network technologies
- Describe Ethernet concepts
|
Duration 1 hour |
- 2 Network Models
- Identify protocols and their port numbers
- Describe the encapsulation and decapsulation process
- Define network processes related OSI model layers
|
Duration 1 hour |
- 3 Concepts in IP Addressing
- Identify the Address Class and Default Mask
- Determine Host and Subnet Requirements
|
Duration 1 hour |
- 4 Working With Cisco Equipment
- Navigate the Cisco IOS Command Line Interface
- Assign IP Addresses
- Enable an Interface
|
Duration 1 hour |
- 5 Basic Catalyst Switch Operations and Configuration
- Identify the benefits of bridges and switches
- Configure switch ports
- Connect switches
|
Duration 1 hour |
- 6 Introduction to Wide Area Networks (WAN's)
- Configure PPP
- Configure Frame Relay
- Configure NAT
|
Duration 1 hour |
- 7 Wireless Local Area Networks (LAN's)
- Identify the differences between wireless LAN standards
- Describe the differences between WLAN modes
- Identify security threats specific to WLAN's and techniques to mitigate them
- Identify the basic configuration steps for installing and using a wireless access point
- Identify the differences between BSS and ESS
|
Duration 1 hour |
- 8 Basic Network Security
- Describe the importance of security policies
- Define basic mitigation steps
|
Duration 1 hour |
- 9 Basic Routing
- Define dynamic routing algorithms
- Describe the use of Administrative Distances
- Configure static routes
- Configure RIP
|
Duration 1 hour |
- 10 Small-Office Internet Connection
- Use the SDM interface to configure a default route
- Use the Cisco SDM interface to configure NAT and DHCP
- Describe IP Sub netting
- Test and troubleshoot LAN and WAN connectivity
|
Duration 1 hour |
|
Telephone: 0871 222 8790
Alternate Number: 01279 814 876
Fax: 01279 816 093
E-Mail: info@e-careers.co.uk
Address:
10 Riverside Business Park,
Stony Common Road,
Stansted Mountfitchet,
Essex,
CM24 8PL
|
|
